Expertly Trained Crews • Industry Certified • Unparalleled Safety Standards • Industry-Leading Reputation

Call Us

416-676-1927

Email Us:

info@armourguard.ca

Our Location

24 Rivalda Rd, Unit #2
Toronto, Ontario, M9M 2M3

How Do You Maintain an ESD Floor?

esd floooring toronto

Maintaining an ESD floor comes down to one rule above all others: never apply anything to the surface that was not specified for it. Ordinary floor finishes, waxes, and polishes are electrical insulators. Applied to a static dissipative floor, they sit on top of the conductive path and block it — and the floor keeps […]

ESD Flooring for Electronics Manufacturing in Toronto

esd flooring options toronto

Electronics manufacturing facilities in Toronto typically need static dissipative flooring in the 1.0 × 10⁶ to 1.0 × 10⁹ ohm range, grounded to a copper grid and verified for body voltage generation under 100 volts. That specification comes from ANSI/ESD S20.20, which most electronics manufacturers work to either by customer requirement or by certification. What […]

Can You Apply Epoxy Over Cracked Concrete?

Yes, but not directly over the crack. Epoxy is a rigid coating that follows whatever is underneath it, so a crack left untreated will telegraph straight through the finished floor — usually within the first year, sometimes within weeks. Cracks have to be routed out, filled with a structural repair material, and, most importantly, understood […]

Why Urethane Cement Handles Thermal Shock Better Than Epoxy

Epoxy & Polyurethane Flooring Retail And Commercial Toronto

Urethane cement handles thermal shock better than epoxy for one fundamental reason: its coefficient of thermal expansion is close to that of concrete, while epoxy’s is significantly higher. When a floor is heated or cooled rapidly, urethane cement expands and contracts at roughly the same rate as the slab beneath it. Epoxy does not — […]

How Long Does an Epoxy Floor Take to Cure?

epoxy flooring for retail stores in Toronto

A standard epoxy floor typically accepts light foot traffic 12 to 24 hours after the final coat, normal foot traffic at 24 to 48 hours, and vehicle traffic at 3 to 7 days. Full chemical resistance usually develops at 5 to 7 days. Fast-cure polyaspartic and hybrid systems compress this dramatically — foot traffic within […]

Warehouse Safety Line Marking Requirements in Ontario

Safety Lines

Ontario does not prescribe line colours or widths for warehouse floor markings. This surprises people who expect a regulation they can point to, but the Industrial Establishments Regulation — R.R.O. 1990, Reg. 851 under the Occupational Health and Safety Act — is largely performance-based. It requires that aisles and floors be kept free of obstructions […]

How Much Does Polished Concrete Cost for a Commercial Space in Toronto?

polished concrete floors for toronto factory floor

Commercial polished concrete in Toronto typically runs $5 to $15 per square foot, with most projects landing between $6 and $10. A basic grind-and-seal on a new slab in good condition sits at the bottom of that range. A multi-pass mechanical polish to a high gloss, with aggregate exposure and remediation of a damaged slab, […]

Best Flooring for Warehouses: Epoxy vs Polished Concrete

Warehouse Flooring

Warehouses across the GTA depend on their floors more than almost any other building system. Forklift traffic runs constantly, pallet racks impose heavy point loads, and thousands of square feet must stay smooth, safe, and functional through years of demanding use. When it comes time to install or upgrade warehouse flooring, two options consistently rise […]

What Flooring Is Best for Manufacturing Facilities?

Commercial Flooring For Packaging Facilities Toronto

Manufacturing facilities put their floors through conditions that would destroy ordinary flooring within months. Heavy machinery, forklift traffic, dropped tools, chemical spills, thermal shock, and constant vibration create a punishing environment that demands purpose-built flooring solutions. For Toronto manufacturers, the answer is clear: high-performance epoxy and specialty flooring systems designed specifically for industrial conditions consistently […]

What Is ESD Flooring and When Is It Required?

esd flooring toronto

In many Toronto facilities, an invisible threat causes thousands of dollars in damage every year without anyone noticing until it’s too late. Static electricity, the same harmless spark you feel when touching a doorknob in winter, can destroy sensitive electronic components, ignite flammable atmospheres, and disrupt critical operations. For facilities handling electronics, chemicals, or sensitive […]